Performix PLASTI DIP® liquid rubber black mat 325 ml spray can

Performix PLASTI DIP ® liquid rubber black mat

1x 325 ml spray liquid rubber black mat

Performix PLASTI DIP ® liquid rubber black mat

1x 325 ml spray liquid rubber black mat


The original made ​​in USA PlastiDip®, a synthetic rubber coating. Can be used in many areas.
The coating protects against moisture, acid, weathering, electrical voltage, etc. PlastiDip® can be used easily and in a plurality of layers are applied by spraying. PlastiDip® has a static adhesion to the substrate and therefore can be removed if necessary.
Proper surface preparation is not only a prerequisite for an effective installation,
but also for a smooth and durable static cling.

wood: splinter protection from weather and prevent

metal: reduced vibration, noise is absorbed, preventing corrosion, electrically isolated and extreme temperatures

glass: strengthens glass objects

Rope / Fabrics: weather-proof, prevents rotting and fraying

Plastic: protects delicate surfaces from scratches


WEATHERING AND UV RESISTANT, WATER RESISTANT, NON-SILICONE
AS A PROTECTIVE COATING SUITABLE FOR LEAKS AND CRITICAL POINTS

Safety note:

Make sure there is adequate ventilation. Surface must be dry, clean and free of separating substances. For a good result you should avoid direct sunlight, high humidity, and wind. Processing temperature about 20 ° C.
1. Shake vigorously for one minute after the ball begins to rattle the tin. Shake regel¬mässig Also during the application. 2. Hold the can about 30-40 cm above the surface to be painted, move the can with regular movements back and forth, with the tracks partially overlap. Press the spray head fully to obtain a gleichmässi¬gen, wet fog. 3. Expect to pay a drying time of at least 30 minutes between coats. Make as many layers until you reach the desired coverage (average 3-4 layers). 4. Drying time before use: at least 4 hours. 5. coating about 0.5-1 m2 per can.
The seller has no control over the use of this product and accepts no liability other than the replacement of this product.
Dangerous components: Solvent naphtha (petroleum), light aliphatic naphtha Low complex combination of coal-water bons obtained from the distillation of crude oil or natural gasoline; consists predominantly of saturated hydrocarbons having carbon numbers predominantly in the range of C5 to C10 with a boiling range of about 35 ° C to 160 ° C, carbon black.
Hazard: H224: Extremely flammable liquid and vapor. - H304: May be fatal if swallowed and enters airways. - H336: May cause drowsiness and dizziness. - H340: May cause genetic defects. - H350: May cause cancer. - P102: Keep out of the reach of children. - P201: Obtain special instructions before use. - P202: Read and understand all safety precautions. - P210: Keep away from hot surfaces, open flame, sparks and heat. Do not smoke. - P233: Keep container tightly closed. - P241: Use explosion-proof, electrical equipment, ventilating / lighting. - P271: Use only outdoors or in well-ventilated areas. - P281: Use personal protective equipment. - P304 + P340: In case of inhalation: Remove to fresh air and keep at rest in a position comfortable for breathing.
WARNING: Pressurized container. Protect from sunlight and temperatures above 50 ° C. Open or burn even after use Do not force.

DANGER    H222-Extremely flammable aerosol - H229-Pressurised container: May burst if heated - H332-Harmful if inhaled

P102-Keep out of reach of children - P210-Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking - P211-Do not spray on an open flame or other ignition source - P251-Do not pierce or burn, even after use - P261-Avoid breathing mist, spray - P271-Use only outdoors or in a well-ventilated area - P312-Call a doctor, a POISON CENTER if you feel unwell - P410+P412-Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F

EUH066 - Repeated exposure may cause skin dryness or cracking