1K primer for aluminum - spray 400 ml

1K primer primer aluminum light-gray ColorMatic

1x 400 ml spray ColorMatic 1K primer aluminum color: light gray

ColorMatic 1K primer for aluminum, due to its specific formulation components excellent adhesion and corrosion protection properties especially on bare aluminum surfaces. For the specific use for the repair of factory primers of aluminum bodies. Fast drying.

See more detailed description in the article.

1K primer primer aluminum light-gray ColorMatic

1x 400 ml spray ColorMatic 1K primer aluminum color: light gray

ColorMatic 1K primer for aluminum, due to its specific formulation components excellent adhesion and corrosion protection properties especially on bare aluminum surfaces. For the specific use for the repair of factory primers of aluminum bodies. Fast drying.

Treat before working with ColorMatic 1K primer for aluminum base with silicone.
For best results we recommend using with the 1K primer after drying primer for aluminum.

Quality and properties

    Provides excellent adhesion and corrosion protection on bare aluminum substrates

    For the specific use for the repair of factory primers of aluminum car bodies

    Simple, time-saving application

    Fast drying

    Recoated with ColorMatic pre-fill water-based and solvent-based basecoats and topcoats 1K and 2K

Physical and chemical data

    Binder: special resin mixture

    Color: light gray

    Odour: solvent

    Coverage:
    1 m²

    Surface:
    Bare aluminum, polished, sanded-through spots on aluminum substrates

    Temperature resistance: up to 90 ° C

    Shelf Life / Storage:
    10 years if appropriate storage provided (= 10 ° -25 ° C, relative air humidity of max. 60%)

    Container / Content:
    Aerosol cans, maximum nominal volume 400 ml

    VOC: 259.3 g

Environment and labeling

Environmentally sound: The products of MOTIP DUPLI are 100% free from harmful heavy metals. The caps and packagings are made of recyclable materials.

Disposal: Only completely emptied containers for recycling. Bring containers with residues of hazardous waste site.

Labelling: All products made by MOTIP DUPLI comply with the actual labeling regulations according. Directive 1999/45/EC. Preparation directive. All aerosols correspond to TRGS 200 and TRG 300 as well as aerosol dispenser directive 75/324/EEC in the actually valid version.

Instructions

Before use, read the warning texts carefully and always pay attention!

Application

    Clean and sand the surface thoroughly

    Damaged area must be free of grease, dust-free and dry

    Ground with ColorMatic Silicone, No. 174469 Clean

    Can 2 min shake thoroughly

    Test spray

    To be used by the expert

    Wear appropriate respirator (recommended type A2/P3)


Consult instructions on spray can.