Primer Ground grey MST-Design spray 400 ml - 12 pieces
Description
Primer Ground grey MST-Design Spray 400 ml - 12 pieces
Adheres to the following surfaces: glass, ceramic, fiber cement, plastic, cardboard, wood, metal
Primer Ground grey MST-Design Spray 400 ml - 12 pieces
Adheres to the following surfaces: glass, ceramic, fiber cement, plastic, cardboard, wood, metal
Quality and properties:
High-quality nitro-combi quality
Very high filling
Good flow, smooth surface
Fast drying
Protects against rust
Gives excellent adhesion of the topcoat on the ground
Serves the gloss optimizer topcoat
Provides an economical use of the topcoat
Especially user-friendly because of durable and user-friendly, well sanded and painted over quality.
Suitable for indoor and outdoor use
Physical and chemical data:
Color: gray
Durability:
10 years if appropriate storage provided (= 10 ° -25 ° C, relative humidity of max. 60%)
Gloss: mat
5-10 GE in the 60 ° angle of measurement according to DIN 67530
Coverage:
Depending on the nature and color of the substrate range:
400 ml is sufficient for about 0.8 m² at covering layer
Drying (at 20 ° C, 50% relative humidity):
Dust-dry after about 15 minutes
Dry to touch: after 30 minutes
Sandable: about 2-4 hours
Packaging: aerosol cans, maximum nominal volume 400 ml
Environment and labeling
Environmentally sound: This product are 100% free of harmful heavy metals. The caps and packagings are made of recyclable materials.
Disposal: Only empty containers for recycling. Bring containers with residues of problem waste site.
Identification: This product shall be the actual labeling regulations according to. Directive 1999/45 / EC. Preparation directive. All aerosols correspond to TRGS 200 and TRG 300 as well as aerosol guideline 75/324 / EEC in the currently valid version.
Instructions
In spray paints prevent spray ring and tamper-proof cap unauthorized use. Note the corresponding advises on the cap or label.
Read Before applying the warning texts carefully and always pay attention!
Surface preparation:
Surface to be painted, remove rust, sand and clean.
If necessary, spatulas.
The surface must be clean, dry, rust and grease.
Priming:
Shake for 2 minutes.
Small cavities and porous filler areas by multiple thin spraying and sanding equalize.
Spray from a distance of about 25 cm.
After drying wet grinding (about 2-4 hours) with 600-grit sandpaper, clean and dry.
Then apply top coat.
Can be painted with resin or acrylic paints.
Do not spray on synthetic resin paints!