1K primer for aluminum - spray 400 ml
Description
1K primer primer aluminum light-gray ColorMatic
1x 400 ml spray ColorMatic 1K primer aluminum color: light gray
ColorMatic 1K primer for aluminum, due to its specific formulation components excellent adhesion and corrosion protection properties especially on bare aluminum surfaces. For the specific use for the repair of factory primers of aluminum bodies. Fast drying.
See more detailed description in the article.
1K primer primer aluminum light-gray ColorMatic
1x 400 ml spray ColorMatic 1K primer aluminum color: light gray
ColorMatic 1K primer for aluminum, due to its specific formulation components excellent adhesion and corrosion protection properties especially on bare aluminum surfaces. For the specific use for the repair of factory primers of aluminum bodies. Fast drying.
Treat before working with ColorMatic 1K primer for aluminum base with silicone.
For best results we recommend using with the 1K primer after drying primer for aluminum.
Quality and properties
Provides excellent adhesion and corrosion protection on bare aluminum substrates
For the specific use for the repair of factory primers of aluminum car bodies
Simple, time-saving application
Fast drying
Recoated with ColorMatic pre-fill water-based and solvent-based basecoats and topcoats 1K and 2K
Physical and chemical data
Binder: special resin mixture
Color: light gray
Odour: solvent
Coverage:
1 m²
Surface:
Bare aluminum, polished, sanded-through spots on aluminum substrates
Temperature resistance: up to 90 ° C
Shelf Life / Storage:
10 years if appropriate storage provided (= 10 ° -25 ° C, relative air humidity of max. 60%)
Container / Content:
Aerosol cans, maximum nominal volume 400 ml
VOC: 259.3 g
Environment and labeling
Environmentally sound: The products of MOTIP DUPLI are 100% free from harmful heavy metals. The caps and packagings are made of recyclable materials.
Disposal: Only completely emptied containers for recycling. Bring containers with residues of hazardous waste site.
Labelling: All products made by MOTIP DUPLI comply with the actual labeling regulations according. Directive 1999/45/EC. Preparation directive. All aerosols correspond to TRGS 200 and TRG 300 as well as aerosol dispenser directive 75/324/EEC in the actually valid version.
Instructions
Before use, read the warning texts carefully and always pay attention!
Application
Clean and sand the surface thoroughly
Damaged area must be free of grease, dust-free and dry
Ground with ColorMatic Silicone, No. 174469 Clean
Can 2 min shake thoroughly
Test spray
To be used by the expert
Wear appropriate respirator (recommended type A2/P3)
Consult instructions on spray can.